SET_COMMAND_RESPONSE TIMER_ACK - E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums

		E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM Interpretation Questions
SET_COMMAND_RESPONSE TIMER_ACK

RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard.

Search this Thread

Prev

Previous Post

Next Post

Next

December 14th, 2017	#2
prwatE120 Task Group Member Join Date: Jun 2006 Posts: 181	Majid you should queue what you would have responded with if there had been NO need to issue the ACK_TIMER. In other words, a SET_RESPONSE packet with PID = START_ADDRESS and PDL = 0. Peter

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -6. The time now is 10:59 AM.