LAMP ON MODE - E1.20 RDM (Remote Device Management) Protocol Forums

sblair · June 23rd, 2009

My concern would be in adding a mode to a defined message that isn't widely supported. Having a mode that explicitly ignores all commands to strike would often make the product appear broken. Hence, why I don't think there would be very wide support for it.

I'd be curious in understanding their needs with this a bit more. Obviously as you mentioned this could be handled with a manufacturer-specific message and that may be the best option.

June 23rd, 2009	#2
sblair Administrator Join Date: Feb 2006 Posts: 441	My concern would be in adding a mode to a defined message that isn't widely supported. Having a mode that explicitly ignores all commands to strike would often make the product appear broken. Hence, why I don't think there would be very wide support for it. I'd be curious in understanding their needs with this a bit more. Obviously as you mentioned this could be handled with a manufacturer-specific message and that may be the best option. __________________ Scott M. Blair RDM Protocol Forums Admin