|
RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard. |
|
Thread Tools | Search this Thread | Display Modes |
December 14th, 2017 | #1 |
Member
Join Date: Oct 2017
Location: Turkiye
Posts: 38
|
SET_COMMAND_RESPONSE TIMER_ACK
6.3.3 says responder shall response GET/SET command with TIMER_ACK when it takes more than 2ms to do command,
and put the response in queue after doing command but in SET RESPONSE packet, PD is not present and PDL = 0 so what should be put in queue , while PD is not present ? in my case it takes 5 ms to save START_ADDRESS in EEPROM, so my responder must respond SET_COMMAND_RESPONSE TIMER_ACK 6ms, I am confused about what to put in queue after saving data in EEPROM |
Bookmarks |
|
|