|
RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard. |
|
Thread Tools | Search this Thread | Display Modes |
January 8th, 2009 | #1 |
Junior Member
|
DMX_PERSONALITY_DESCRIOTION
Hello,
in ANSI E1.20 on page 68. is written " The GET_COMMAND_RESPONSE message includes the current DMX512 Personality setting and also the total number of personalities available. These personalities shall be consecutively numbered within the responder starting from 1. " Which personality index should I use to GET_DMX_PERSONALITY_DESCRIPTION? from 1 to total number of personalities or from 0 to (total number of personalities-1)? Best regards Tomas Poruba |
January 8th, 2009 | #2 |
Task Group Member
Join Date: Aug 2008
Posts: 375
|
Take a look at this thread, it has a similar discussion
http://www.rdmprotocol.org/forums/showthread.php?p=1136 Based on my reading, the personality would run from 0x01 to 0xFF (or as you said, "1 to total number of personalities"). |
January 9th, 2009 | #3 |
Administrator
|
The key phrase is: "These personalities shall be consecutively numbered within the responder starting from 1."
That means that you would go from 1 to n # of personalities.
__________________
Scott M. Blair RDM Protocol Forums Admin |
Bookmarks |
Thread Tools | Search this Thread |
Display Modes | |
|
|