RDM-NET forces TCP - E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums

		E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDMnet (E1.33) General Discussion
RDM-NET forces TCP

Mark Forums Read

RDMnet (E1.33) General Discussion General Discussion and questions concerning the E1.33 standard.

Search this Thread

Prev

Previous Post

Next Post

Next

March 7th, 2023	#1
Florida-Rob Junior Member Join Date: Jan 2023 Posts: 3	RDM-NET forces TCP reading the spec, had hoped to build intelligent devices, based on a micro (i.e 64K Flash, 8K RAM), supporting sACN / DMX / RDM and RDM-NET we support UDP stack, but full TCP is too much memory... hence LLRP would be ok, but we cannot support TSP for RDMNet. thoughts ?

Bookmarks

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RDM over Art-Net	jpk__	RDM User Discussion	2	July 21st, 2013 03:44 PM
RDM V1.0 and Art-Net	anstein	RDM General Implementation Discussion	1	July 23rd, 2006 10:50 PM

All times are GMT -6. The time now is 11:19 AM.