RDM on the WEB - E1.20 RDM (Remote Device Management) Protocol Forums

aimnorthwest · February 5th, 2016

I have a system (architectural) in place, RDM enabled. Would like to interrogate and view status remotely via internet. How can I do this?

sblair · February 5th, 2016

Welcome to the RDM forums!

It really will depend on the architectural controller you are using. You'll need one that supports RDM and allows for a remote connection. If you're using something PC-based you can always just set up a remote connection to that computer so you can log into it.

Some of the more sophisticated RDM controllers allow you to set up mail notifications and such to notify you of different errors or conditions.

There are also various "inline" systems that can live in between your existing architectural controller and the fixtures and can act as the RDM controller for the system. Something like Pathport from Pathway Connectivity comes to mind here.

ericthegeek · February 5th, 2016

OLA has a Web GUI you can use to manage a system.

You might also look at ETC's Net3 Conductor to see if it will meet your needs

February 5th, 2016	#1
aimnorthwest Junior Member Join Date: Feb 2016 Posts: 2	RDM on the WEB I have a system (architectural) in place, RDM enabled. Would like to interrogate and view status remotely via internet. How can I do this?

February 5th, 2016	#2
sblair Administrator Join Date: Feb 2006 Posts: 438	Welcome to the RDM forums! It really will depend on the architectural controller you are using. You'll need one that supports RDM and allows for a remote connection. If you're using something PC-based you can always just set up a remote connection to that computer so you can log into it. Some of the more sophisticated RDM controllers allow you to set up mail notifications and such to notify you of different errors or conditions. There are also various "inline" systems that can live in between your existing architectural controller and the fixtures and can act as the RDM controller for the system. Something like Pathport from Pathway Connectivity comes to mind here. __________________ Scott M. Blair RDM Protocol Forums Admin

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

February 5th, 2016	#3
ericthegeek Task Group Member Join Date: Aug 2008 Posts: 378	OLA has a Web GUI you can use to manage a system. You might also look at ETC's Net3 Conductor to see if it will meet your needs