|
RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard. |
|
Thread Tools | Search this Thread | Display Modes |
April 2nd, 2014 | #1 |
Junior Member
Join Date: Mar 2014
Posts: 8
|
PRESET_INFO
Hi,
a couple of question about PRESET_INFO PID (responder device side): 1- Does the "Level Field Supported" field affect only PRESET_PLAYBACK message or also DMX_FAIL_MODE, DMX_STARTUP_MODE behaviour? 2- If in DMX_FAIL_MODE i would like support only INFINITE HOLD TIME (so when DMX512 missing i stay in the scene selected in DMX_FAIL_MODE until DMX512 restored), what values should i expose in DMX512 Fail Minimum/Maximum Hold Times Supported? Thanks everyone Francesco |
April 3rd, 2014 | #2 | |
Task Group Member
Join Date: Aug 2008
Posts: 375
|
Quote:
That's a good question. I guess the best option is to set the "DMX512 Fail Infinite Hold Time Supported" flag and use 0xFFFF for both Min and Max. Some controllers might interpret that as "Not Supported", but I don't see any other options. |
|
April 3rd, 2014 | #3 |
Junior Member
Join Date: Mar 2014
Posts: 8
|
Thanks Eric (guess it's your name...). I totally agree with your answare. In general I like E1.37-1 but I think there are some points that need a better explanation!!!
|
April 3rd, 2014 | #4 |
Task Group Member
Join Date: Aug 2008
Posts: 375
|
True, there are definitely corner cases (like the one you describe) where it's not always clear what the right choice is.
When you have questions, always feel free to post them. There may not be a perfect answer sometimes, but we'll try to point you in the right direction. (Yes, my name is Eric...) |
Bookmarks |
Thread Tools | Search this Thread |
Display Modes | |
|
|