Where to start..... - E1.20 RDM (Remote Device Management) Protocol Forums

PeakPaul · January 23rd, 2012

Hi All,

I'm new to this forum, had a fairly good look around the different topics, but I was wondering where to start with RDM.

There is a lot of good info on here, I have the rdm.h header file that was posted, and I bought a copy of the 2010 spec.

I'm looking to implement RDM as a responder for an existing LED stage lighting fixture, but only need very basic RDM functionality to start with (DISCOVERY, SET / GET DMX ADDRESS, SUPPLY PRODUCT INFO).

With the timing aside, what are the basic commands I need to process/ respond to?

Thanks - Paul.

January 23rd, 2012	#1
PeakPaul Junior Member Join Date: Jan 2012 Location: Buxton, Derbyshire Posts: 5	Where to start..... Hi All, I'm new to this forum, had a fairly good look around the different topics, but I was wondering where to start with RDM. There is a lot of good info on here, I have the rdm.h header file that was posted, and I bought a copy of the 2010 spec. I'm looking to implement RDM as a responder for an existing LED stage lighting fixture, but only need very basic RDM functionality to start with (DISCOVERY, SET / GET DMX ADDRESS, SUPPLY PRODUCT INFO). With the timing aside, what are the basic commands I need to process/ respond to? Thanks - Paul.