|
RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product. |
|
Thread Tools | Search this Thread | Display Modes |
March 12th, 2015 | #1 |
Junior Member
Join Date: Apr 2014
Posts: 9
|
Time precision for *_HOURS
If the variable LAMP_HOURS = 1, is it equal to 1 hour or the number must be multiplied by a factor equal to the ratio of what? In other words, how much precision for the time LAMP_HOURS, DEVICE_HOURS?
|
March 12th, 2015 | #2 |
Administrator
|
It's equal to 1 hour.
__________________
Scott M. Blair RDM Protocol Forums Admin |
March 12th, 2015 | #3 |
Task Group Member
Join Date: Jun 2006
Posts: 181
|
Sergeychk
The unit for LAMP HOURS and DEVICE hours is, as Scott has indicated, in hours. On our products we actually keep track of such timings in increments of 10minutes, so that if the product is on for two 50 minute sessions, followed by a further 20 minutes, it will eventually show as having been on for 2 hours and not 0 hours. Clearly such behaviour is dependent on a number of other factors, such as the provision of non-volatile storage and the number of times you can legally write to it over an extended period of time. Peter |
Bookmarks |
Thread Tools | Search this Thread |
Display Modes | |
|
|