E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM Interpretation Questions

RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard.

Thread Tools Search this Thread Display Modes
Old April 10th, 2009   #1
Junior Member
Join Date: Apr 2009
Posts: 1
Default White balance

Can sameone explain me how to balance a white color with an RGB lamp using RDM commands?
Do I have to use the "SD_COLOR_RED", "SD_COLOR_GREEN", "SD_COLOR_BLUE" slot labels?
How do I have to set these parameters?
marco.micheli is offline   Reply With Quote
Old April 10th, 2009   #2
Join Date: Feb 2006
Posts: 430
Send a message via AIM to sblair Send a message via MSN to sblair


Can you clarify, are you looking to define a "white balance" parameter or how to achieve white output with a color mixing device that has RGB parameters?
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote
Old April 10th, 2009   #3
Task Group Member
Join Date: Aug 2008
Posts: 369

You don't use RDM to control the fixture, you use RDM to configure the fixture. Think of RDM as allowing you to do all the things you typically do from the fixture's setup menu, but instead of having to touch the fixture you can do it remotely.

A fixture with a user setable white point could include an RDM command that sets the white point, but I'm not aware of any equipment that does so.
ericthegeek is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 01:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.