|
RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard. |
|
Thread Tools | Search this Thread | Display Modes |
|
May 13th, 2018 | #1 |
Junior Member
Join Date: May 2018
Posts: 4
|
Queued Message for SubDevices
Hello,
I want to add the queued message handle for my dimmer system but as I see in the standard the queued_message_get is addressed only for the root device. If one of my sub-device have message to collect do I simple reply with the corresponding PID and modify the sub-device field in the reply message? Sandor www.pls.hu |
May 13th, 2018 | #2 |
Administrator
|
Yes, that is correct. The intent of this is to reduce the amount of polling needed so QUEUED_MESSAGEs are sent only to the root device and the response can be either from the root or the sub-device by setting the Sub-Device field accordingly in the response.
__________________
Scott M. Blair RDM Protocol Forums Admin |
May 14th, 2018 | #3 |
Junior Member
Join Date: May 2018
Posts: 4
|
Thank You Scott!
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Response to GET:QUEUED MESSAGE when NACKing query | prwatE120 | RDM Interpretation Questions | 3 | February 24th, 2016 05:33 PM |
What NACK to use for messages sent to Subdevices ? | prwatE120 | RDM Interpretation Questions | 0 | February 24th, 2016 05:08 PM |
Status Message Markers | hamish | RDM General Implementation Discussion | 4 | December 9th, 2010 11:12 PM |
Personality & Subdevices | kocurr | RDM General Implementation Discussion | 1 | July 8th, 2008 09:30 PM |
ENTTEC RDM controller (subdevices) | nic123 | RDM Marketplace Discussion | 3 | October 24th, 2007 12:03 AM |