|
RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product. |
|
Thread Tools | Search this Thread | Display Modes |
February 9th, 2009 | #1 |
Task Group Member
|
Product Marking for RDM Compliance
Hi all,
When we implement RDM in a product, we intend to affix a sticker to make it clear to the user that the product's firmware now supports RDM. As this is to be an upgrade to some existing products, marking the individual product as RDM compliant is useful to us versus simply modifying the specification of the product. We have decided to make this artwork freely available for anyone to use in their products once RDM is implemented. The artwork is based up on Wayne Howells proposed splitter markings (published in Control Freak). Wayne is happy for us to use a variation of his original concept in this way. The artwork is available for download in a zipped format at the link below, containing Corel Draw, AI, EPS and Jpg versions of the artwork. http://support.zero88.com/main/en/download/504 We have kept the artwork to a single colour to enable it to be printed on as many products as possible. Last edited by pkirkup; February 9th, 2009 at 04:59 PM. |
December 1st, 2009 | #2 |
Task Group Member
Join Date: Jul 2006
Posts: 10
|
Goddard Design will most likely use it to
__________________
*************************************** Bob Goddard Goddard Design Co. www.goddarddesign.com sales@goddarddesign.com *************************************** |
Bookmarks |
Thread Tools | Search this Thread |
Display Modes | |
|
|