E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM Interpretation Questions

RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard.

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old May 14th, 2018   #1
Junior Member
Join Date: May 2018
Posts: 4
Default Clearify ACK_TIMER than QUEUED_MESSAGE


I've read several post about ACT_TIMER and QUEUED_MESSAGE, please help me to sum and clear the things about it:

1. As soon as I get a SET message for parameter modification but I need more time than 2mS to finish that SET command I HAVE TO reply to the controller with ACK_TIMER reply, am I correct?
2. In the ACK_TIME response do I have to inc the message count before I send the reply to the controller or not?
3. Till the given time not spent, the controllel can address other responders, just exclude my unit which needs time to finish the previous job (e.g. save the data to EEPROM/FLASH for the got SET command)
4. When the TIME spent, the controller send QUEUED_MESSAGE to the responder which sent the ACK_TIME. Here I have to reply with the ACK for the previous SET (which requested TIME)?
5. In my reply if it is an ACK, do I use the TRANSACTION_NUMBER what I get from the controller for the QUEUED_MESSAGE or what I got in the SET command what for I replied with ACK_TIME?

Thanx in advance!


Last edited by sandor; May 14th, 2018 at 07:03 AM. Reason: add one more question
sandor is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
QUEUED_MESSAGE & Status Types pkleissler RDM Interpretation Questions 13 August 1st, 2019 03:23 AM
QUEUED_MESSAGE - must controllers support this? berntd RDM General Implementation Discussion 2 October 31st, 2013 10:06 PM
Please clarify: QUEUED_MESSAGE (10.3 Collection of Queued and Status Messages) berntd RDM Interpretation Questions 1 September 27th, 2013 06:33 PM
QUEUED_MESSAGE - ? berntd RDM General Implementation Discussion 9 November 24th, 2009 08:48 AM

All times are GMT -6. The time now is 07:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.