E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM Interpretation Questions

RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard.

Reply
 
Thread Tools Search this Thread Display Modes
Old June 14th, 2006   #1
nic123
Junior Member
 
Join Date: Jun 2006
Posts: 14
Default Discovery Mute/Un mute

discussion followed on from yaho groups:

>Nic,
>
>The only Broadcast message that responders reply to is the
>DISC_UNIQUE_BRANCH message.
>
>I don't monitor these forums that close, so you'll get faster responses in
>the RDM Protocol Developer forums that we've recently opened at
>http://www.rdmprotocol.org


Page 36 of spec seems to say there are response packets for both of those.

Nic
nic123 is offline   Reply With Quote
Old June 14th, 2006   #2
sblair
Administrator
 
Join Date: Feb 2006
Posts: 417
Send a message via AIM to sblair Send a message via MSN to sblair
Default

It says that it must Set or Clear the Mute flag when it receives a Mute or Un-Mute message on a Broadcast address or it's own address.

That does not mean that it responds on the link though when receiving a Broadcast message. You can also send a Broadcast message for everyone to set their DMX Address to 1. All the devices do that action, but since it was a Broadcast message, they know not to respond.

The only message that should get a response when sent to a Broadcast address is the DISC_UNIQ_BRANCH message.
sblair is offline   Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Incremental Discovery prwatE120 RDM General Implementation Discussion 0 September 26th, 2008 12:49 AM
broadcast Disvovery Mute/Unute berntd RDM Interpretation Questions 2 April 8th, 2008 10:07 PM
Mute Response Question sondericker RDM Interpretation Questions 13 January 21st, 2007 10:14 AM
Discovery Response Preamble prwatE120 RDM General Implementation Discussion 0 January 20th, 2007 12:22 AM
Discovery Checksum Problem Analysis nic123 RDM General Implementation Discussion 3 September 24th, 2006 10:25 PM


All times are GMT -6. The time now is 05:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.