E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM General Implementation Discussion

RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product.

Thread Tools Search this Thread Display Modes
Old August 31st, 2010   #1
Join Date: Feb 2006
Posts: 433
Send a message via AIM to sblair Send a message via MSN to sblair
Thumbs up Call for RDM Gear for display at LDI Connectivity Booth and Sessions

All, we are looking for RDM/ACN/E1.31 gear to display on the ESTA Connectivity Pavillion as well as to use for the different interactive panel discussions we are doing on both RDM and ACN.

If you have gear you are interested in providing please see the info below for details.


A Call to Connect
June 9, 2010 - Submitted by Karl G. Ruling

All entertainment lighting, effects, and sound equipment manufacturers around the world are invited to supply product for this year's Connectivity Pavilion at LDI 2010, to be held at the Las Vegas Convention Center, October 22nd through the 24th in Las Vegas, NV. We're looking for controllers, monitoring equipment, signal distribution devices, luminaires, accessories, and other devices that use the American National Standards developed by ESTA's Control Protocols Working Group, particularly ANSI E1.11, E1.17, E1.20, and E1.31, otherwise known by their acronyms DMX512-A, ACN, RDM, and sACN (streaming DMX-type data using ACN) respectively. The devices will be shown working together as part of a multi-protocol network to show the utility and compatibility of the protocols.

The Connectivity Pavilion at LDI 2010 will be a 10' by 30' space in booth 1247, across from the ESTA/World ETF booth. The Pavilion provides a demonstration area to the industry at large of manufacturers' implementations of the American National Standards developed by ESTA's Control Protocols Working Group. By bringing together various pieces of equipment in a neutral area, we are able to show the public how various manufacturers' products can interconnect and communicate, and demonstrate that the protocols that have been worked on by these member manufacturers are viable and available for use today.
Manufacturers interested in participating are asked to fill out the response form available at http://www.esta.org/news/docs/ResponseForm.pdf. The form can be filled out with Reader 7 or later, or an equivalent third-party Acrobat reader or PDF creator, the form saved with the data and emailed to Bill Ellis, the Connectivity Pavilion Organizing Committee Chairman, at bellis@candelacontrols.com.

Selected participants will be expected to ship the product and have it available at the Pavilion by 20 October for booth setup. Participants will be responsible for picking up the product and return shipping after the close of the show on Sunday, 24 October 2010. We also are asking manufacturers to provide personnel to offer demonstrations during show hours, but no person will be expected to be there the entire time. In fact, the versatility of the protocols will be better demonstrated if a changing crew of people are able to operate the equipment.
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RDM and ACN at LDI 2008 - Booth 2509 prwatE120 RDM Marketplace Discussion 0 October 14th, 2008 11:15 AM
LDI 2007 prwatE120 RDM General Implementation Discussion 0 October 29th, 2007 01:02 PM

All times are GMT -6. The time now is 06:25 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.