STATUS_NONE response - E1.20 RDM (Remote Device Management) Protocol Forums

sblair · January 2nd, 2014

The _CLEARED types are not types that can be requested by the controller. If you look at Table 10-1 the column on the left shows all the possible Status Types that a controller can send to you as a request. The other columns going across are the Status Types allowed to be returned for a given Status Type request.

If you don't support the "_CLEARED" types then all you have to do is just not ever return one as part of a response.

January 2nd, 2014	#1
sblair Administrator Join Date: Feb 2006 Posts: 441	The _CLEARED types are not types that can be requested by the controller. If you look at Table 10-1 the column on the left shows all the possible Status Types that a controller can send to you as a request. The other columns going across are the Status Types allowed to be returned for a given Status Type request. If you don't support the "_CLEARED" types then all you have to do is just not ever return one as part of a response. __________________ Scott M. Blair RDM Protocol Forums Admin

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode