Controlling PWM freq. using RDM - E1.20 RDM (Remote Device Management) Protocol Forums

dangeross · October 16th, 2009

The only possible problem I see with using DMX personalities is that if in the future you add more channels, frequencies, or current settings you could easily find yourself exceeding the 8-bit limit for personalities. Unless you can get PWM_FREQ and CURRENT_LIM added to the Configuration 0x06xx PID category in the Standard manufacturer specific may be you safest bet for future product expansion.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

October 16th, 2009	#5
dangeross Junior Member Join Date: Feb 2009 Posts: 13	The only possible problem I see with using DMX personalities is that if in the future you add more channels, frequencies, or current settings you could easily find yourself exceeding the 8-bit limit for personalities. Unless you can get PWM_FREQ and CURRENT_LIM added to the Configuration 0x06xx PID category in the Standard manufacturer specific may be you safest bet for future product expansion.