What is the basic requirement to implement RDM?

[ericthegeek]

Every UART is different, and I've never use the PSoC devices, so I can't tell you how their UART behaves. Usually it takes a few hours with some simple test code and an oscilloscope to determine when the actual interrupt is generate and how it handles error reporting.

[wcai_cypress]

Quote:
For receiving, a framing error with data of 00H can be assumed to be a break.
I met a problem, For example:
Break Header = 88 us
MAB = 8 us
With the quoted method,
for the first 80us, UART will detect 2 bytes of 0x00 with frame error.
80~84us of the break header will be taken as start bit of a new byte,
85~88us of the break header & MAB & some bits in start byte will form this new byte.
So this method will lead to wrong result.

Does anything wrong with my description?