White balance - E1.20 RDM (Remote Device Management) Protocol Forums

ericthegeek · April 10th, 2009

You don't use RDM to control the fixture, you use RDM to configure the fixture. Think of RDM as allowing you to do all the things you typically do from the fixture's setup menu, but instead of having to touch the fixture you can do it remotely.

A fixture with a user setable white point could include an RDM command that sets the white point, but I'm not aware of any equipment that does so.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

April 10th, 2009	#3
ericthegeek Task Group Member Join Date: Aug 2008 Posts: 390	You don't use RDM to control the fixture, you use RDM to configure the fixture. Think of RDM as allowing you to do all the things you typically do from the fixture's setup menu, but instead of having to touch the fixture you can do it remotely. A fixture with a user setable white point could include an RDM command that sets the white point, but I'm not aware of any equipment that does so.