Request in the middle of ACK_TIMER - E1.20 RDM (Remote Device Management) Protocol Forums

endoftheworld · July 11th, 2006

Hey all,

Since the spec doesn't cover this in detail, I just wanted to know how what should be the outcome of this possible scenario :-

Controller sends SET_CMD (LAMP_STRIKE)
Responder sends back an ACK_TIMER ( wait 5 secs)
. .
. Controller sends a GET_CMD (any PID)
. Responder sends back an ACK_TIMR (wait 2 secs)
. .
. .
(end of 5 sec) Controller sends GET_QUEUED
what happens now ?
(In the Message Queue on Responder , we'll have 2 messages, which gets sent first ?)
I'd assume a FIFO (is that correct ?)

Hope it makes Sense

Cheers
EOD

July 11th, 2006	#1
endoftheworld Junior Member Join Date: Jul 2006 Posts: 6	Request in the middle of ACK_TIMER Hey all, Since the spec doesn't cover this in detail, I just wanted to know how what should be the outcome of this possible scenario :- Controller sends SET_CMD (LAMP_STRIKE) Responder sends back an ACK_TIMER ( wait 5 secs) . . . Controller sends a GET_CMD (any PID) . Responder sends back an ACK_TIMR (wait 2 secs) . . . . (end of 5 sec) Controller sends GET_QUEUED what happens now ? (In the Message Queue on Responder , we'll have 2 messages, which gets sent first ?) I'd assume a FIFO (is that correct ?) Hope it makes Sense Cheers EOD Last edited by endoftheworld; July 12th, 2006 at 12:04 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ACK_TIMER Handling	ericthegeek	RDM General Implementation Discussion	8	January 20th, 2011 08:15 PM
ACK_TIMER, QUEUED Messages	berntd	RDM Interpretation Questions	1	November 12th, 2008 10:02 PM
ACK_TIMER Example Error	prwatE120	RDM Interpretation Questions	1	December 26th, 2006 03:46 PM