PRESET_PLAYBACK and Non volatile memory - E1.20 RDM (Remote Device Management) Protocol Forums

docsale · April 1st, 2014

Hi everyone,

i'm currently adding PRESET capability to a Dimmer. When PRESET_PLAYBACK is changed (for example from OFF to Scene 1) do I have to save this status to non -volatile memory? I mean: if my dimmer turns off than when it turns on again (while the controller remains on) what it is supposed to do? It should restore Scene 1 or it will restart reponding to DMX512 and would be up to the controller to check the responder status and restore the Scene 1?

Thanks!!!

April 1st, 2014	#1
docsale Junior Member Join Date: Mar 2014 Posts: 8	PRESET_PLAYBACK and Non volatile memory Hi everyone, i'm currently adding PRESET capability to a Dimmer. When PRESET_PLAYBACK is changed (for example from OFF to Scene 1) do I have to save this status to non -volatile memory? I mean: if my dimmer turns off than when it turns on again (while the controller remains on) what it is supposed to do? It should restore Scene 1 or it will restart reponding to DMX512 and would be up to the controller to check the responder status and restore the Scene 1? Thanks!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRESET_PLAYBACK	berntd	RDM Interpretation Questions	1	October 18th, 2009 11:14 PM