FRAMING ERROR Detection method - E1.20 RDM (Remote Device Management) Protocol Forums

prwatE120 · March 2nd, 2012

It should be possible to use a timer in conjunction with the UART framing error detection, especially if you look at the data returned by the UART during the framing error.

I have many sucessfull DMX/RDM receiver designs that do not need to resort to using a second external irq.

I think want Eric meant is : "dont just assume that a Framing Error" is a break.

Peter

March 2nd, 2012	#4
prwatE120 Task Group Member Join Date: Jun 2006 Posts: 181	It should be possible to use a timer in conjunction with the UART framing error detection, especially if you look at the data returned by the UART during the framing error. I have many sucessfull DMX/RDM receiver designs that do not need to resort to using a second external irq. I think want Eric meant is : "dont just assume that a Framing Error" is a break. Peter