Auto DMX Addressing via RDM ?! - E1.20 RDM (Remote Device Management) Protocol Forums

chamber · November 11th, 2009

Thank you for reply soon. Mike.

My PC software application system (USB2DMX) provide the configuration address of DMX device.

Your meaning that it should ask user to "enable" controller by hand to discover the new letter and set address of it, is so ?!

Therefore, my idea is : Uses the Discovery method on the PC Software, lists all of devices and try to control one device at one time.(for instance by light the letter in a certain colour). It is possible to arrange their order easily !

That was still rest on the RDM !

Thanks everybody's opinion discussion.

November 11th, 2009	#12
chamber Junior Member Join Date: Aug 2008 Location: Taiwan Posts: 8	Thank you for reply soon. Mike. My PC software application system (USB2DMX) provide the configuration address of DMX device. Your meaning that it should ask user to "enable" controller by hand to discover the new letter and set address of it, is so ?! Therefore, my idea is : Uses the Discovery method on the PC Software, lists all of devices and try to control one device at one time.(for instance by light the letter in a certain colour). It is possible to arrange their order easily ! That was still rest on the RDM ! Thanks everybody's opinion discussion. Last edited by chamber; November 11th, 2009 at 08:08 AM.