View Single Post
Old March 6th, 2011   #1
nomis52
Task Group Member
 
Join Date: May 2010
Location: San Franciscio
Posts: 57
Default RDM Responder Tests are Ready

I've completed most of the work on the E1.20 responder tests now. As you can see from the output below the test suite has 162 tests as well as a bunch of checks for warning and advisory messages. In writing these tests I've found all sorts of cool ways that responders break and/or output garbage .

Code:
----------------- By Category -----------------
                    Control:    8 /  8     100%
                Sub Devices:    1 /  1     100%
              Configuration:    9 /  9     100%
        Product Information:   17 / 17     100%
         Network Management:    4 /  4     100%
         Core Functionality:    2 /  2     100%
           Error Conditions:   86 / 86     100%
           Display Settings:    4 /  4     100%
               DMX512 Setup:    9 /  9     100%
      Power / Lamp Settings:   12 / 12     100%
                    Sensors:    6 /  6     100%
          Status Collection:    2 /  2     100%
-----------------------------------------------
160 / 162 tests run, 160 passed, 0 failed, 0 broken

Sometime in the future I'll start adding the E1.37 PIDs. In the meantime if anyone wants to run them for themselves information is here: http://opendmx.net/index.php/RDM_Responder_Testing

Now here's the challenge for everyone: I haven't found a device yet that can pass every test. The output above is from my software emulated responder.

Simon
nomis52 is offline   Reply With Quote