alvangee : I just ran a RDM Responder test with 128 DMX slots in between. DMX Frame rate = 20.
I have two Raspberry Pi's which are acting as an Enttec DMX USB Pro. One is set in Mode 2, and one is set in Mode 3 (OLA RDM Sniffer compatible).
And one Raspberry Pi as a RDM Responder.
I have uploaded the output of the sniffer here :
https://drive.google.com/file/d/0B0Q...ew?usp=sharing
When you do a
grep DMX 128" Sniffer.log then you will see
that the DMX data is correctly outputted by the host and widget.
When you look at the sniffer monitor
https://picasaweb.google.com/lh/phot...eat=directlink
then you see statistics where the break-to-break time is 25000 us
- Arjan