View Single Post
Old December 9th, 2019   #2
sblair
Administrator
 
Join Date: Feb 2006
Posts: 433
Send a message via AIM to sblair Send a message via MSN to sblair
Default

Welcome to the forums. Which RDM Test Platform are you using? There's a couple out there so knowing that will help.

The Discovery Command Class is 0x10. This is detailed in Table A-1. The PID values are in Table A-3 in the document.

What are you are probably seeing is that Section 6.3.4 stipulates that a NACK is only sent for unknown GET_COMMAND and SET_COMMAND requests.

If you see a Command Class for DISCOVERY_COMMAND then you should not send a NACK.
__________________
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote