Responder is fully operational!
I can't express enough how helpful it is to have a place to go for help when things aren't working. It would have been very difficult for a non-RDM guy like me to get the nuances of some of this without the help I got here.
Thanks again to Eric for his patient responses. Here's my final list of PIDs:
DISC_UNIQUE_BRANCH DISC_MUTE
DISC_UN_MUTE
STATUS_MESSAGES
STATUS_ID_DESCRIPTION
SUPPORTED_PARAMETERS
PARAMETER_DESCRIPTION
DEVICE_INFO
DEVICE_MODEL_DESCRIPTION
MANUFACTURER_LABEL
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
SENSOR_DEFINITION
SENSOR_VALUE
IDENTIFY_DEVICE
RESET_DEVICE
TUNGSTEN_FADE_SETTING (mfgr custom)
8_16_BIT_DMX_SETTING (mfgr custom)
The Goddard DMXter4A plus the Benjamin Electrics Integrity software ran a total of 3198 tests on my Responder that all passed, no failures, warnings, advisories, or timing errors! I'm planing on going to a Plugfest the next time there's one in North America. I suspect there's still some issues in this implementation that I''l bet the guys in the trenches can find.
Thank you rdmprotocol.org!
DougJ / BlackTank
Last edited by dj41354; December 30th, 2015 at 09:31 AM.
|