Addressing Universes on RDM: Manufacturer PID V ENDPOINT_TO_UNIVERSE
Hello Everyone,
This is my first message, surely not the last one.
At Robert Juliat we are working on a new platform and we have an embedded node that can receive Art-Net and Sacn. Also we have one a classic DMX/RDM port.
We implemented RDM E1.20 + parts of E1.37-1/-2.
We have to address Universes by RDM for Sacn and Art-Net:
- Should we use a MANUFACTURER_PID or ENDPOINT_TO_UNIVERSE 0x0903 from E1.37-?
- For Art-Net could we use 0 to 32767 to address the universe?
Thanks
|