Quote:
Originally Posted by berntd
But where in the response does the responder set which subdevice is actualluy responding? Is it just byte 3/4 ?
|
Byte 3/4 counting from where?
Looking at table 6-6 in the standard, the sub-device goes in slots 18 and 19. It's after the Message Count and before the Command Class.
For the GET QM request, slots 18:19 would be 0x0000.
If subdevice 9 had a new DMX address, slots 18:19 in the response would be 0x0009.
For most RDM packets, the response's Sub-Device Field will match the request's sub-device, but this is one case where they won't match.