Quote:
Originally Posted by swisson
But based on the binding UID it knows which is the primary port, and will communicate only though this port?
|
I don't think this is true. The RDM controller can communicate with *any* of the ports, not just the primary port. In fact, for a PID like DMX_START_ADDRESS, you must be able to send it to each port individually so that each port to be patched differently. You may want one port to start a slot 10, and another to start at 57.
The main reason for the binding UID mechanism is to permit the controller to understand that the four ports are all a single device if you're drawing a pretty system block diagram.
A responder could even have different personality settings for each port.