View Single Post
Old November 12th, 2009   #8
Paul-Zero88
Task Group Member
 
Join Date: Dec 2008
Posts: 17
Default

In our RDM controller, we chose to use the SET:IDENTIFY_DEVICE (OFF) PID to 'ping' known responders to see if they were present on the network. This is a mandatory PID so there is no ambiguity about the response from the device. It also has the happy side-effect of clearing any stuck identify states in the responders. Of course this method might not be suitable for all controllers, but it worked for us.
Paul-Zero88 is offline   Reply With Quote