E1.20 RDM (Remote Device Management) Protocol Forums - RDM 1.37-5 Example-Parameter in Folder e1.20 which are not part of Spec-Sheet

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)

- RDM Interpretation Questions (http://www.rdmprotocol.org/forums/forumdisplay.php?f=5)

- - RDM 1.37-5 Example-Parameter in Folder e1.20 which are not part of Spec-Sheet (http://www.rdmprotocol.org/forums/showthread.php?t=1345)

Qasi_

September 17th, 2024 03:49 PM

RDM 1.37-5 Example-Parameter in Folder e1.20 which are not part of Spec-Sheet

Hi while implementing the 1.37-5 JSON stuff i discoverd some Parameter which are not defined in the 1.20 Spec-Sheet but are in the 1.20 Folder.
I never heared of this Parameters, and there is also no valid pid defined.
Did anyone know something about thees Parameters?

CONTROLLER_FLAG_SUPPORT
NACK_DESCRIPTION
PACKED_PID_INDEX
PACKED_PID_SUB
QUEUED_MESSAGE_PID_SUBSCRIBE
QUEUED_MESSAGE_SENSOR_SUBSCRIBE
SUPPORTED_PARAMETERS_ENHANCED

sblair

September 17th, 2024 05:40 PM

Hey Qasi,

These are some of the new parameter messages that will be in an updated revised version of ANSI E1.20 that we are nearing completion on.

Thanks
Scott

All times are GMT -6. The time now is 12:59 PM.