E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM General Implementation Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=4)
-   -   same Software Version ID for different Model IDs ? (http://www.rdmprotocol.org/forums/showthread.php?t=1280)

majid May 12th, 2018 04:06 AM

same Software Version ID for different Model IDs ?
 
I plan to use same software for several Models of RDM LED array fixtures.

the aim is to reduce production complexity so that one main software will be programmed to all PCBs.
then at the last phase of production , the Model ID and Device ID will be determined via Special PID or SC=0x91.
this process will be done in factory and will not available for costumers.

so naturally all products will have same software version ID, same PIDs, and different model IDs, and different Personality descriptions.

for example :
Model 1: 15 LEDs, software Ver 1.0, Personality: 1,3,5 LED/Pixel
Model 2: 30 LEDs, software Ver 1.0, Personality: 1,2,3,5,6,10,15 LED/Pixel
Model 3: 45 LEDs, software Ver 1.0, Personality: 1,3,5,9,15 LED/Pixel

It seems complies to 10.4.1 criteria,
I am not sure since the personalities are different.
I considered previous discussions:

http://www.rdmprotocol.org/forums/sh...ghlight=x.spot
http://www.rdmprotocol.org/forums/sh...ghlight=x.spot

Is it OK to have same software Version ID for different Model IDs ?
or shall I generate individual softwares for different models ?

ericthegeek May 13th, 2018 07:26 AM

This approach seems fine to me.

majid May 18th, 2018 03:12 AM

Quote:

Originally Posted by ericthegeek (Post 3163)
This approach seems fine to me.

thanks eric


All times are GMT -6. The time now is 03:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.