E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM General Implementation Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=4)
-   -   RDM Emulation (with ArtRDM) (http://www.rdmprotocol.org/forums/showthread.php?t=1304)

Fraser Connollly January 2nd, 2020 01:21 PM

RDM Emulation (with ArtRDM)
 
Those of you at the European Plugfest 2019 will have seen the demonstration of my Art-Net and RDM emulation package.

The software (OCPE) is now available to download at www.offstagecontrols.com/ocpe.

I've made a couple of youtube videos showing how to set it up.
https://www.youtube.com/playlist?lis...qYd26tM6fWK_9i

If you have any questions about the software, responder requests or any other feedback feel free to post it here or at twitter.com/offstagectrls.

I've started work on the E1-33 implementation which I hope to have available as a beta for the European Plugfest in February 2020.
https://www.eventbrite.co.uk/e/plasa...ts-65643711107

I hope you find this helpful.

Fraser

sblair January 2nd, 2020 01:28 PM

Fraser,

Very cool! It would be awesome to see you add emulation of RDMnet Devices in the future to it as that could be a lot of use as people are beginning their RDMnet development.

Fraser Connollly January 2nd, 2020 01:34 PM

Thanks Scott,

That's literally what I'm developing at the moment, I've just gotten the ETC demo controller compiled and running with a RTP gateway connected.

Do you know where I can find any other RDM Net controllers to test against? The 0.3 ETC release is a good start but it's far from a finished package as it sends off some illegally formatted Get Requests so it's a bit difficult to test with.


All times are GMT -6. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.