Discovery Mute/Un mute
discussion followed on from yaho groups:
>Nic, > >The only Broadcast message that responders reply to is the >DISC_UNIQUE_BRANCH message. > >I don't monitor these forums that close, so you'll get faster responses in >the RDM Protocol Developer forums that we've recently opened at >http://www.rdmprotocol.org Page 36 of spec seems to say there are response packets for both of those. Nic |
It says that it must Set or Clear the Mute flag when it receives a Mute or Un-Mute message on a Broadcast address or it's own address.
That does not mean that it responds on the link though when receiving a Broadcast message. You can also send a Broadcast message for everyone to set their DMX Address to 1. All the devices do that action, but since it was a Broadcast message, they know not to respond. The only message that should get a response when sent to a Broadcast address is the DISC_UNIQ_BRANCH message. |
All times are GMT -6. The time now is 05:45 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.