E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM Physical Layer/Hardware Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=6)
-   -   RS485 networking (http://www.rdmprotocol.org/forums/showthread.php?t=394)

tracyu June 11th, 2008 05:54 PM

RS485 networking
 
1 Attachment(s)
Attached is an Appnote from TI on implimenting RS485 networks which I believe you will find usefull for making DMX/RDM work for you. while it is geared for the industrial control market many of the points are good to know when implimenting these protocols.
Enjoy!
Tracy:D


All times are GMT -6. The time now is 01:14 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.