E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM General Implementation Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=4)
-   -   Captured RDM packets (http://www.rdmprotocol.org/forums/showthread.php?t=1003)

chris February 10th, 2009 02:11 PM

Captured RDM packets
 
Hi i am currently working on an RDM implementation & have invested in ESTA standard & jump start for my testing are there any example captured packets eg discovery mode controller responder and start address read & set so i can see a real world example to compare with paperwork
many thanks
chris
dmxdesign ltd

ericthegeek February 11th, 2009 11:16 AM

1 Attachment(s)
Here's a few hex dumps off the DMX line. A "K" represents a break.

Get Current Address:
K CC 01 18 4C 52 00 7A 18 46 47 44 00 40 30 00 06 01 00 00 00 20 00 F0 00 04 6D
K CC 01 1A 47 44 00 40 30 00 4C 52 00 7A 18 46 06 00 00 00 00 21 00 F0 02 00 01 04 72

Set New Address:
K CC 01 1A 4C 52 00 7A 18 46 47 44 00 40 30 00 07 01 00 00 00 30 00 F0 02 00 01 04 83
K CC 01 18 47 44 00 40 30 00 4C 52 00 7A 18 46 07 00 00 00 00 31 00 F0 00 04 7E

I've also attached a text file with a discovery sequence. (I cut off the last few packets at the end to reduce the file size). Note that this is an exhaustive discovery. There are a number of shortcuts you can take to speed up discovery.

There dumps are from a DMXter4 talking to a HES Studiopix fixture.

chris February 11th, 2009 02:02 PM

thank you very much for that information now to go and start comparing and see how it works then to try and see if i can get something talking
many thanks
chris


All times are GMT -6. The time now is 05:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.