E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM Marketplace Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=16)
-   -   RDM Responder for low cost testing (http://www.rdmprotocol.org/forums/showthread.php?t=1165)

jpk__ July 7th, 2013 08:00 PM

RDM Responder for low cost testing
 
We've added a standalone RDM responder to our ultraDMX RDM Pro product which is handy for testing RDM controllers. It's kind of like the Enttec RDM responder but built into the USB DMX box and will run independent of the computer (just power with a USB supply/charger).
It will also simulate 16x RDM responders with adjacent UID's and appropriate discovery responses meaning you can load your RDM controller easily with "real" devices. If you have one of these already upgrade to v1.2 firmware using the configuration utility
http://dmxking.com/usbdmx/ultradmxrdmpro


All times are GMT -6. The time now is 04:55 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.