E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM Interpretation Questions (http://www.rdmprotocol.org/forums/forumdisplay.php?f=5)
-   -   Queued Message for SubDevices (http://www.rdmprotocol.org/forums/showthread.php?t=1281)

sandor May 13th, 2018 07:33 AM

Queued Message for SubDevices
 
Hello,

I want to add the queued message handle for my dimmer system but as I see in the standard the queued_message_get is addressed only for the root device. If one of my sub-device have message to collect do I simple reply with the corresponding PID and modify the sub-device field in the reply message?


Sandor
www.pls.hu

sblair May 13th, 2018 08:57 PM

Yes, that is correct. The intent of this is to reduce the amount of polling needed so QUEUED_MESSAGEs are sent only to the root device and the response can be either from the root or the sub-device by setting the Sub-Device field accordingly in the response.

sandor May 14th, 2018 02:10 AM

Thank You Scott! ;)


All times are GMT -6. The time now is 05:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.