E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM Interpretation Questions (http://www.rdmprotocol.org/forums/forumdisplay.php?f=5)
-   -   E1.20 Errate Public Review (http://www.rdmprotocol.org/forums/showthread.php?t=675)

ericthegeek October 2nd, 2008 09:59 AM

E1.20 Errate Public Review
Looking over the Errata document that's currently up for public review, I don't understand the following:

> "All GET messages throughout Section 10 should
> show the show the Sub-Device GET range
> stopping at 0xFFFE."

Per section 9.2.1, the Sub Device field can be:
  • 0x0000 for the root device
  • 1-512 (0x0001-0x0200) for sub devices
  • 0xFFFF for sub device all call.
What is 0xFFFE supposed to represent? As I read it, 0x0201 through 0xFFFE are not valid values for the Sub Device field.

sblair October 5th, 2008 03:42 PM


Fair enough! I believe that should have been stated as stopping at 0x0200 for GET Commands.

Please submit a Public Review comment on that if you would.

All times are GMT -6. The time now is 02:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.