E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM General Implementation Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=4)
-   -   Possible to use RDM to START a channel at the END of a fixture? (http://www.rdmprotocol.org/forums/showthread.php?t=1287)

dgaller August 20th, 2018 01:41 PM

Possible to use RDM to START a channel at the END of a fixture?
 
Meaning, if I have 20 fixtures on a building, but the electrician installed one "backwards", is it possible to flip the starting address to the end of the fixture, and the last address to the front of the fixture?

sblair August 20th, 2018 08:37 PM

It is really going to be specific to the device as to how it does addressing and if it gives you the ability to set the address on individual cells vs setting a start address for the entire fixture.


All times are GMT -6. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.