Additional Message Sets for RDM (E1.37-2), IPv4 & DNS Configuration Messages – NOW AVAILABLE

E1.37-2 defines additional PIDs for configuring IPv4 and basic DNS functionality for a device.  As more products start to include IPv4/Ethernet interfaces, it makes sense to have a single set of PIDs to configure settings such as the IPv4 Address, Subnet mask etc., rather than relying on manufacturer PIDs.

This standard was published in October 2014 as ANSI E1.37-2 and is available from the PLASA Foundation.

Defines for all these new PIDs can be found in the updated rdm.h file located in the Developers->Resources->Downloads section of the website.

Below is a listing of the new messages added in this document:

IPv4 Configuration Messages
Get Interface List (LIST_INTERFACES)
Get Interface Name (INTERFACE_LABEL)
Get Hardware Address (INTERFACE_HARDWARE_ADDRESS_TYPE1)
Get/Set DHCP (IPV4_DHCP_MODE)
Get/Set Zeroconf Mode (IPV4_ZEROCONF_MODE)
Get IPv4 Address / Netmask (IPV4_CURRENT_ADDRESS)
Get/Set IPv4 Static Address (IPV4_STATIC_ADDRESS)
Set Apply Interface Configuration (INTERFACE_APPLY_CONFIGURATION)
Set Renew DHCP Lease (INTERFACE_RENEW_DHCP)
Set Release DHCP Lease (INTERFACE_RELEASE_DHCP)
Set Release DHCP Lease (INTERFACE_RELEASE_DHCP)
Get/Set Default Route (IPV4_DEFAULT_ROUTE)
Get/Set Name Servers (DNS_IPV4_NAME_SERVER)
Get/Set Host Name (DNS_HOSTNAME)
Get/Set Domain Name (DNS_DOMAIN_NAME)

Go to Top