E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM Interpretation Questions

RDM Interpretation Questions Discussion and questions relating to interpreting and understanding the E1.20 RDM Standard.

Reply
 
Thread Tools Search this Thread Display Modes
Old May 13th, 2018   #1
sandor
Junior Member
 
Join Date: May 2018
Posts: 4
Default Queued Message for SubDevices

Hello,

I want to add the queued message handle for my dimmer system but as I see in the standard the queued_message_get is addressed only for the root device. If one of my sub-device have message to collect do I simple reply with the corresponding PID and modify the sub-device field in the reply message?


Sandor
www.pls.hu
sandor is offline   Reply With Quote
Old May 13th, 2018   #2
sblair
Administrator
 
Join Date: Feb 2006
Posts: 413
Send a message via AIM to sblair Send a message via MSN to sblair
Default

Yes, that is correct. The intent of this is to reduce the amount of polling needed so QUEUED_MESSAGEs are sent only to the root device and the response can be either from the root or the sub-device by setting the Sub-Device field accordingly in the response.
__________________
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote
Old May 14th, 2018   #3
sandor
Junior Member
 
Join Date: May 2018
Posts: 4
Default

Thank You Scott!
sandor is offline   Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Response to GET:QUEUED MESSAGE when NACKing query prwatE120 RDM Interpretation Questions 3 February 24th, 2016 05:33 PM
What NACK to use for messages sent to Subdevices ? prwatE120 RDM Interpretation Questions 0 February 24th, 2016 05:08 PM
Status Message Markers hamish RDM General Implementation Discussion 4 December 9th, 2010 11:12 PM
Personality & Subdevices kocurr RDM General Implementation Discussion 1 July 8th, 2008 09:30 PM
ENTTEC RDM controller (subdevices) nic123 RDM Marketplace Discussion 3 October 24th, 2007 12:03 AM


All times are GMT -6. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.