E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM General Implementation Discussion

RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product.

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old March 21st, 2016   #1
dj41354
Member
 
Join Date: Nov 2015
Posts: 30
Default RDM Hub Implementation

I've started looking at implementing a 1 channel in, 4 channels out RDM Hub. I'm going to try and keep it as simple as possible, ie. the Hub itself doesn't need to be discoverable, or able to be set up remotely.. I just need to be able to pass the data (in both directions) correctly.

I'm looking for any advice on how to architect this.. ie.. is the simplest to: 1) monitor the packets coming in (that are coming into the master port and are being received by the hub connected devices); 2) If a valid RDM packet gets detected, when it finishes, wait to see if one of the hub connected devices activates his transmitter to respond, and if so; 3) turn the transmitter on the master port (to the console) on; 4) monitor the response of the hub connected responder as it sends its packet to the console; 5) when the responders RDM packet finishes turn the busses back to the initial state & begin the process over.

Thanks in advance for any help with this..
Doug.
dj41354 is offline   Reply With Quote
 

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RDM Implementation Requirements RobbG RDM General Implementation Discussion 1 February 18th, 2015 11:53 AM
RDM software/implementation austen RDM User Discussion 5 April 3rd, 2013 11:02 PM
Partial RDM implementation? svanciel RDM General Implementation Discussion 7 November 7th, 2008 07:19 AM
Master Fader accross Rdm implementation Question berntd RDM General Implementation Discussion 1 May 9th, 2008 12:12 AM
Welcome to the RDM General Implementation Discussion Forum sblair RDM General Implementation Discussion 0 May 31st, 2006 10:38 PM


All times are GMT -6. The time now is 06:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.