View Single Post
Old July 4th, 2011   #4
Martin.nielsen
Junior Member
 
Join Date: Oct 2008
Location: Denmark
Posts: 5
Send a message via Skype™ to Martin.nielsen
Default

Thanks for the responses guys

My setup is the following:
A root device with a single DMX/RDM responder port. This port is of course to communicate with the RDM controller.

The root device could potentially be having several (more than 512) subdevices attached to it using a propriatary protocol on its command port.

The subdevices havent got UIDs. (This could perhaps be implemented though - but only if this is the only way to make it work)

I guess for the proxy approach to work my subdevices should all be having UIDs so that the root device can present them to the RDM controller - correct?

/Martin

Last edited by Martin.nielsen; July 4th, 2011 at 12:42 AM.
Martin.nielsen is offline   Reply With Quote