E1.20 RDM (Remote Device Management) Protocol Forums

E1.20 RDM (Remote Device Management) Protocol Forums (http://www.rdmprotocol.org/forums/index.php)
-   RDM Physical Layer/Hardware Discussion (http://www.rdmprotocol.org/forums/forumdisplay.php?f=6)
-   -   Outdoor 4 pin connector pinout (http://www.rdmprotocol.org/forums/showthread.php?t=1279)

majid April 28th, 2018 09:41 AM

Outdoor 4 pin connector pinout
 
My design is an outdoor LED array RDM fixture almost finished is goning to be produced soon
48VDC powered with single cable IP66 connector
4 pin : V+/V-/D+/D-

I know for XLR connectors standard pinout is :
1) COM
2) D-
3) D+

But I couldn't find standard pinout for circular 4 pin outdoor connectors like my design

is there any standard pinout of 4-pin connetors with DC power and RDM/DMX?

Otherwise I plan to assign pins as below :
1) V- (COM)
2) D-
3) D+
4) V+

ericthegeek April 30th, 2018 08:16 PM

The E1.11 DMX document has some text covering the use of alternate connectors, adapters, and pinouts.

majid May 12th, 2018 02:42 AM

Quote:

Originally Posted by ericthegeek (Post 3160)
The E1.11 DMX document has some text covering the use of alternate connectors, adapters, and pinouts.

thanks for reply


All times are GMT -6. The time now is 11:56 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.