PDA

View Full Version : RDM Interpretation Questions

  1. Welcome to the RDM Interpretation Discussion Forum
  2. Discovery Mute/Un mute
  3. Self Test
  4. Error counters
  5. ACT_TIMER to Set messages
  6. Request in the middle of ACK_TIMER
  7. Mute Response Question
  8. SC_SUB_MESSAGE values
  9. get queued messages as a ping?
  10. Sub-device response to SET/GET DMX512 start address
  11. Device Models
  12. Multi-devices or sub-devices
  13. Get_Parameter_Description 10.4.2
  14. ACK_TIMER Example Error
  15. Table 6-6 Checksum Example Error
  16. Max Value for 32bit Timers
  17. COMMS_STATUS Error reporting
  18. Reset sensor data of all sensors
  19. broadcast Disvovery Mute/Unute
  20. E1.20 Errate Public Review
  21. DISC_UNIQUE_BRANCH dest UID (section 7.3)
  22. DMX Personality
  23. Must a device support 32 charecters in DEVICE_LABEL?
  24. Is there a minimum required PID list for sub-devices?
  25. ACK_TIMER, QUEUED Messages
  26. DMX_PERSONALITY_DESCRIOTION
  27. White balance
  28. Command Class / Parameter ID mismatch handling
  29. LAMP ON MODE
  30. Sub Device and Personality
  31. PID = SUPPORTED_PARAMTERS / PARAMTER_DESCRIPTION question
  32. SLOT_INFO
  33. PARAMETER_DESCRIPTION data type semantics
  34. SLOT_DESCRIPTION
  35. CAPTURE_PRESET pdl?
  36. PRESET_PLAYBACK
  37. DEFAULT_SLOT_VALUE
  38. RESET_DEVICE
  39. Self test description question
  40. RDM discovery trouble
  41. Responders with multiple Responder Ports in a single Device.
  42. Question about resetting sensors
  43. Maximum number of Sub-Divices?
  44. Proxy
  45. Sub-Device Status Threshold
  46. Interpretation of ACK_TIMER
  47. SD_COLOR_SEMAPHORE Mistake?