PDA

View Full Version : RDM General Implementation Discussion

  1. Welcome to the RDM General Implementation Discussion Forum
  2. Who besides me is working on RDM equipment?
  3. Reference Platform
  4. Forum Tips -- Email Subscribe
  5. RDM Diagram
  6. RDM V1.0 and Art-Net
  7. Confusion about versions
  8. Minor coffee oops
  9. Slot Label Code
  10. RDM Appendix A #define header file attached
  11. ASN.1 description of RDM
  12. Checksum curiosa
  13. Anybody actually doing any opensource RDM design
  14. Discovery Checksum Problem Analysis
  15. Sensor string tables
  16. RDM Generator needed
  17. Discovery Response Preamble
  18. RDM Test Equipment?
  19. RDM PLUGFEST LONDON
  20. Packet Captures?
  21. RDM Data Exchange Capture for Book?
  22. LDI 2007
  23. Broadcasting to a device model
  24. RDM E1.20 Draft Errata
  25. Open Source RDM Project
  26. Anyone with Coemar?
  27. Master Fader accross Rdm implementation Question
  28. Personality & Subdevices
  29. Auto DMX Addressing via RDM ?!
  30. When is a different start code allowed?
  31. Incremental Discovery
  32. RDM and lighting designers
  33. ACK_TIMER Handling
  34. Partial RDM implementation?
  35. Simple dimmer error reporting
  36. ESTA Announces RDM Interoperability Plugfest
  37. RDM and Dimmers
  38. Uniquely defining the RDM response of devices
  39. Product Marking for RDM Compliance
  40. Captured RDM packets
  41. RDM/DMX Performance
  42. AVR Responder Lib tested with ENTTEC
  43. RDM Discovery - Effect of Manufacturer IDs
  44. RDM Plugfest Back by Popular Demand
  45. Firmware download
  46. PDL size and manufacturer specific parameter ID's
  47. Master list of RDM Product IDs
  48. capture & playback preset
  49. Additional Sensor Unit Defines - Table A13
  50. Figure 7-2: Device Discovery Process
  51. Sensor type and Sensor unit for DMX rate question
  52. Sensor type and Sensor unit for No of Phases question
  53. How should I best implement a dimmer?
  54. Controlling PWM freq. using RDM
  55. STATUS_MESSAGES
  56. Additional Status Message ID request?
  57. QUEUED_MESSAGE - ?
  58. Manufacturer Specific Pids
  59. ESTA Control Protocols Plug Fest Returns in January!
  60. When to use Queued Msg VS Status Msg
  61. DMX Addressing when Footprint is Zero
  62. Timing out IDENTIFY_DEVICE
  63. Refreshing of paramters need Queued Messages?
  64. Status Message Markers
  65. European RDM plug fest
  66. E1.37-1 RDM Message Extensions document in Public Review
  67. ESTA Control Protocols Plugfest Returns in July!
  68. Relative frequency of UID set changes to RDM messages events
  69. Missing RDM pararameters
  70. Call for RDM Gear for display at LDI Connectivity Booth and Sessions
  71. RDM Compatibility Corner at PLASA 2010
  72. Correctly handling ACK_OVERFLOW
  73. SENSOR_DEFINITION - User Defined
  74. Tuneable White: Mapping?
  75. RDM & DMX frames multiplexing
  76. Usage of PARAMETER_DESCRIPTION for manufacturer-specific PIDs
  77. RDM discover driving against dmx input (wrong cabling)
  78. eCue RDM with a Martin Mac 350
  79. Device Discovery
  80. SELF_TEST_DESCRIPTION index range
  81. RDM Responder Tests are Ready
  82. RDM Discovery packets
  83. RDM E1.20-2010 Version Now Available.
  84. PLASA Plugfest July 2011
  85. errors when testing discovery
  86. Handling incorrect messages
  87. Detailed questions on STATUS_MESSAGES
  88. IDENTIFY_ORIENTATION
  89. RDM Icon
  90. SENS_GPS
  91. DEVICE_TAGS
  92. Pixelstring on RDM
  93. Sub-Device Personalities
  94. Where to start.....
  95. European RDM/sACN Developers Conference and Plugfest 2012
  96. RDM and simple status reporting
  97. FRAMING ERROR Detection method
  98. Refreshing "parameter_description" ?
  99. Refreshing "parameter_description" ?
  100. Wireshark Arnet/RDM/DMX dissector
  101. RDM Master UID assignment question
  102. personalities and footprints
  103. Trying to run the automated tests
  104. Units in Status Messages
  105. RDM Firmware Uploads
  106. status error queued?/status id definnition
  107. European RDM/sACN Developers Conference and Plugfest 2013
  108. Discovery procedure clarification
  109. RDM and DMX512 will soon be retired!
  110. Differences in current OLA RDM Responder tests?
  111. Errors and Sub Device All Call
  112. Subdevice labelling question
  113. Disc_Unique_Branch response
  114. RDM Responder tests updated
  115. QUEUED_MESSAGE - must controllers support this?
  116. Enttec RDM USB Pro not decoding get response
  117. European RDM/sACN Developers Conference and Plugfest 2014
  118. Request Call for New PIDs!
  119. new PID suggestion: disable
  120. new PID suggestion: pan/tilt lock
  121. Sensor Defintion/Support Parameters
  122. new PID: comms_status_sc0
  123. new PID: last active port on splitter
  124. SubDevice Required PIDs
  125. PRESET_PLAYBACK and Non volatile memory
  126. Table C-2
  127. New PID "Slot Labels"
  128. New PID "CURVE DEFINITION"
  129. European RDM/sACN Developers Conference and Plugfest 2015
  130. Second configurable DMX address
  131. New PID: IDENTIFY_DEVICE_WITH_TIMEOUT
  132. New RDM Expansion PIDs doc in Public Review
  133. RDM Implementation Requirements
  134. Answer for unsuspected queries
  135. Time precision for *_HOURS
  136. RDM Responder Tests and background DMX
  137. What is the genral opinion about using ACK_TIMER for...
  138. UID / EUID convertor
  139. Non-ASCII Characters
  140. DMXter4 says "not responding"
  141. What is range of typical Controller traffic?
  142. Integrity software (Goddard, Jese Controllers)
  143. Responder help
  144. GET_STATUS_MESSAGES for fault reporting
  145. Responder is fully operational!
  146. Help needed for a responder
  147. Frequence min responder
  148. Does controller need it's UID and support any PIDs?
  149. How suitable is DMX/RDM for architectural lighting/home automation applications
  150. RDM on Arduino
  151. European RDM and sACN Developers Conference and Plugfest 2016
  152. RDM Hub Implementation
  153. How should master handle receiving DMX after sending request?
  154. Adressing the RDM
  155. change parameter setting
  156. European RDM and sACN Developers Conference and Plugfest - 2017
  157. How to handle DMX Footprint overrun
  158. Enable/Disable RDM?
  159. DMX_PERSONALITY
  160. RDM logo usage
  161. 2 sets of personality
  162. RDM logo
  163. same Software Version ID for different Model IDs ?
  164. Possible to use RDM to START a channel at the END of a fixture?
  165. PARAMETER_DESCRIPTION
  166. DMX
  167. OLA server error
  168. RDM repeater
  169. New C++-oriented `rdmconst.h` header
  170. InvalidDiscoveryPID: FAILED
  171. RDM Emulation (with ArtRDM)
  172. Tunable White RDM fixture
  173. Sensor commands
  174. Discovery response format
  175. Addressing Universes on RDM: Manufacturer PID V ENDPOINT_TO_UNIVERSE
  176. Status Messages
  177. E1.37-5 URL parameters
  178. Slot_Info / Slot ID Type-Slot Category/ID implementation issue
  179. Discovery response not recognized
  180. Help understanding an rdm response
  181. New SI prefixes
  182. Changing DMX512 footprint
  183. For developing a "not fast" RDM proxy hardware, use ACK_timer or other method?
  184. 8811E High-Speed RDM Decoder IC — Compact RDM Luminaire Design Solution
  185. E1.37-4 File Transfer Control